Close-up of the aluminum misting head that is
attached to the fan.
3 Nozzle misting head is shown
Fan motor is not totally enclosed and should not be exposed to rain or moisture to prevent damage.

Our 24" Ceiling Mount Misting Fan is ideal for cooling medium to large sized areas. While this misting fan is perfect
for mist cooling applications, the 24" diameter fan makes it ideal for dust and odor control applications as well. The
fan motor features 3 speeds that deliver up to a maximum of 7525 CFM of air! Mounting bracket mounts fan directly
to the ceiling.

The 24" Ceiling Mount Misting Fan has an oscillating feature that allows the fan head to oscillate up to 90º. The fan
oscillator can be turned off if you prefer to operate the fan head in a fixed position. Fan operates on 120 volts and is
UL Listed and meets OSHA standards

Attached to the front of the fan guard is one of our anodized aluminum mister heads that houses the misting nozzles.
This low pressure misting fan come with a garden hose swivel to attach to a garden hose. Each plastic misting nozzle
has a built-in mesh screen filter to prevent nozzle clogging and damage. In-line filters can be added below if you are
operating the misting fan with poor quality water or want to double filter your water.

Sizing Note: For most mist cooling applications we recommend ordering a misting fan with no more than 5 misting
nozzles. If you are using the misting fan for dust or odor control applications, then we recommend ordering a misting
fan with 7 or 10 misting nozzles. In the event the misting fan is putting out too much mist for your liking, you can
always plug misting nozzles off by purchasing a set of plugs below.
Select Number of Misting Nozzles
24" Low Pressure Ceiling Mount Misting Fan
Misting Systems & Misting Fans


Residential, Commercial, and Industrial Misting Applications

Phone: 610-481-9696
Optional Accessories
Brass Plugs- 10 Pack (to plug off misting nozzles)

If your misting fan is making too much mist for your liking,
you can always remove misting nozzles and plug them off
with these brass plugs. These brass plugs are sold in packs
of 10 and are made from solid brass.

Pack of 10 Brass Plugs- $25.00
Low Pressure In-Line Filter

If you have a lot of sediment, minerals, or debris in your water we
recommend ordering this in-line filter. This filter will filter the water
before it enters your mister head to prevent nozzle clogging. If
ordered, we will install the filter for you.

Aqua Misters
PO Box 633
Orefield, PA 18069

Phone: 610-481-9696

A division of SnowStorm Snowmaking, LLC

Entire contents copyright 2007-2018. All rights reserved.